Re: Machining Tips!

Cliff wrote:

>   Fixture offsets come out of such a just a call to a numbered offset
> register (or set of same) in the CNC control. CNC control then applies 
> the data set by the machine's operator in it's fixture offset registers
> (under program control). 
>   Part of why ISO-4343 mentions "in the part coordinate system"
> to begin with.
>   Pretty simple but well beyond jb's conception.

You still haven't explained what the difference between a work offset
and a fixture offset is. I know JB knows. As does every other
alt.machines.cnc regular. Except you. Apparently it's far beyond your 
grasp since you haven't yet been able to explain it.

> Did you catch his wanting to link the active WCS to the active view/****t
> automatically? LOL ... I think you are either pretty gullible or miss
most of
> his profound stupidity. Or both.

Nope. I didn't see that post. But that's not an absurd request despite
your pathetic bleating to the contrary. In Mastercam by default, the 
construction planes and tool planes follow the current view
automatically. 

I turn that feature off, I personally find it annoying, but most of the 
people I've worked with like it. Since you, and probably other dolts like 
you (Joe788, Gary Knutson, and the rest of JB's imbecilic fan club) can't 
see how the WCS changing automatically with views *could* be handy, that 
only goes to prove just how bliss ignorance can really be.

> He claimed to program using the numbers on the print & then used a
negative
> diameter in his code example

The only person ****tarded enough to talk about "negative diameters" has
been YOU.

-- 
Black Dragon

May a deranged midget on a pogo stick
take refuge in your sister's hoop skirt.