mark wrote:
> "Cliff" <Clhuprich@[EMAIL PROTECTED]
> wrote in message
> news:ts4524lu7sita29655u4hriqj9nrc3c69t@[EMAIL PROTECTED]
>> On Wed, 7 May 2008 19:10:27 -0500, "mark" <mark@[EMAIL PROTECTED]
> wrote:
>>
>>>
>>> "Cliff" <Clhuprich@[EMAIL PROTECTED]
> wrote in message
>>> news:dk80245ijaqd29e90o93qj52f9caro2f27@[EMAIL PROTECTED]
>>>> On Mon, 5 May 2008 20:06:12 -0500, "mark" <mark@[EMAIL PROTECTED]
> wrote:
>>>>
>>>>> Greetings All,
>>>>> I have a basic knowledge of SW (enough to construct die details,
>>>>> forms, etc) and have MasterCAM. My goal is to be able to design a
>>>>> given part in SW,
>>>>> im****t in to MCAM, and output it as a file to be sent to our
>>>>> ProtoTRAK. Design and build in one stop.... Is this too ambitious
>>>>> to try on my own? I
>>>>> opened up MCAM, and it looks like a fairly intense app. Any
>>>>> opinions whether
>>>>> this is doable or not on my own??? Many thanks, Mark
>>>>>
>>>>
>>>> How much did you pay for the MasterCAM?
>>>> --
>>>> Cliff
>>>
>>> Nuttin'
>>
>> Perhaps you could buy Vector or BobCAD?
>> http://imsrv.com/
>> http://www.cadcamcadcam.com/hobby/
>>
>> --
>> Cliff
> To clarify, I paid nuttin' because it's installed at work. So I
> didn't pay for it. But the problem is the only guy who knew MasterCAM
> quit, and no one else knows how to use it. I thought I'd be able to
> help out by picking up the basics, at least.
http://www.streamingteacher.com/home/index.aspx
http://www.mastercam.com/Sup****t/Training/Default.aspx
http://www.educationcenteronline.org/IT-Training/CNC-Programming.html
http://www.cad2cam.net/
http://www.tipsformanufacturing.com/html/mastercam_cds.html
http://www.caminstructor.com/
and so on.....
There is also a great deal of material on the install CD.
--
John R. Carroll
www.machiningsolution.com
|
