On Aug 25, 6:55=A0pm, Riad KACED <riad.ka...@[EMAIL PROTECTED]
> wrote:
> Dear Sykab,
>
> You can ex****t a cds schematic/layout as an eps (Encapsulated Post
> Script) file.
> I would recommend the following steps.
>
> 1. Add the following bit at the end of your ~/.cdsplotinit file
> (This is what I've made 5 years back)
>
> #########################################################
> # Customization to print out EPS files from Virtuoso Schematic/Layout
> #########################################################
>
> EPS B&W|Encapsulated Postscript: \
> =A0 =A0 =A0 :manufacturer=3DAdobe: \
> =A0 =A0 =A0 :type=3Depsf: \
> =A0 =A0 =A0 :maximumPages#1: \
> =A0 =A0 =A0 :resolution#300: \
> =A0 =A0 =A0 :paperSize=3D"6x8 inches" 1800 2400: \
> =A0 =A0 =A0 :paperSize=3D"8x6 inches" 2400 1800: \
> =A0 =A0 =A0 :paperSize=3D"8x8 inches" 2400 2400: \
> =A0 =A0 =A0 :paperSize=3D"8x10 inches" 2400 3000: \
> =A0 =A0 =A0 :paperSize=3D"10x8 inches" 3000 2400:
>
> EPS COL|Encapsulated Postscript: \
> =A0 =A0 =A0 :manufacturer=3DAdobe: \
> =A0 =A0 =A0 :type=3DepsfC: \
> =A0 =A0 =A0 :maximumPages#1: \
> =A0 =A0 =A0 :resolution#300: \
> =A0 =A0 =A0 :maximumPages#1: \
> =A0 =A0 =A0 :resolution#300: \
> =A0 =A0 =A0 :paperSize=3D"6x8 inches" 1800 2400: \
> =A0 =A0 =A0 :paperSize=3D"8x6 inches" 2400 1800: \
> =A0 =A0 =A0 :paperSize=3D"8x8 inches" 2400 2400: \
> =A0 =A0 =A0 :paperSize=3D"8x10 inches" 2400 3000: \
> =A0 =A0 =A0 :paperSize=3D"10x8 inches" 3000 2400:
>
> #########################################################
>
> 2. Launch your Cadence and your schematic.
> From your Schematic window, go to :
> Design -> Plot -> Submit
>
> Click the 'Plot Options ...' button and then :
> Choose one of the EPS printers defined above + the desired option.
> Don't forget to tick the 'send plot only to file' button and then fill
> your destination file: ~/mySchematic.eps
>
> I would recommend to:
> - untick the 'mail log to' button unless you prefer to get emails at
> each print.
> - untick the 'plot header' button in the main plot form.
>
> Click OK and your CIW should come with a successful Status.
>
> You can visualize the eps file with ghostView (gv), gimp or any other
> utility in Linux.
> You can include your eps into a Latex do***ent, FrameMaker, ooffice
> and even that commonly used word processor whose name is not worth to
> be mentioned in here ...
>
> Cheers,
> Riad.
I can use cdsplot generate pretty fine schmatic image, but only can
gerenate black-white layout image (EPS). How can I generate colorful
layout EPS? thank you.
|
